We’re going to cut the waist in a circular motion. Take a piece of cloth with a width of 44 inches and a length of 2 meters. A flare a-line skirt pattern will need more fabric. Now that a simple A-line is drafted, modifications to the pattern can be made for different skirt styles. Now turn the waistband inside out, and the waistband is almost done.Īnd that’s it. Sew the waistband together along with the seam allowance. Step 6: Finish up the waistįold the waistbands top-down. The invisible zipper should measure 11 inches in length. A 1/4 inch seam allowance is used to bring the top edge together. Keep the waistband piece right side down on the right side up the skirt, on top of the waistline of the skirt. There must be 7 inches left unstitched to install an invisible zipper. Stitch the side seams of the skirt by keeping the front and back piece’s right sides together. Join the front and back skirt pieces together. Step 2: DraftĬut the A-line skirt pattern according to the markings. The general shape of an A-line skirt is a trapezoid, i.e., smaller at the top and wider at the bottom.ĭecide the length, and then mark the fabric. The measurements can vary depending on the fabric. Whatever the number, double it and add 3 more inches for seam allowance. The standard A-lineįirst, let us learn how to draft a simple midi-length A-line skirt. In this post, we will discuss 10 ways to design an A-line skirt.
0 Comments
Leave a Reply. |